Ridgid SP6490 Manual do Utilizador descarregar pdf (Página 15)

15

Installing the Head

CAUTION: The head assembly

weighs about 80 pounds. To reduce

the risk of back injury get help to lift

the head.

1. Locate (2) two 10mm dia. x 12mm long

set screws in loose parts bag.

2. Remove protective bag from head

assembly and discard. Carefully lift head

above column tube and slide it onto col-

umn making sure head slides down over

column as far as possible. Align head

with table and base.

3. Install a set screw in each hole (as indi-

cated) on the right side of the head, and

using a 5mm hex “L” wrench, tighten the

two head lock set screws.

10mm Dia. x 12mm

Set Screw

Head

Column

Head Lock

Set Screws

Head

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Comentários a estes Manuais

Sem comentários